Apps & downloads

The server and the panels update themselves over the air; Installer Studio is the one you keep current on your own machine. This page tells you which piece is which, and how to drive those updates.

1.The four pieces

A finished installation runs three things on site, plus the tool you commission with.

  • Server (smart-api) — the brain. Runs on the small computer in the electrical cabinet, talks to KNX / Z-Wave / Zigbee / Modbus, stores the configuration and keeps automations running.
  • Room panel (knx-panel) — the wall display the customer touches.
  • Panel app (Electron GUI) — the older wall-display software, still used on panels that shipped with it.
  • Installer Studio — the commissioning tool. It runs on your own computer and connects to the house, so it is the one piece you keep up to date yourself.
The cloud portal is a fifth piece, but it runs on our servers — you just sign in.

2.Server (smart-api)

Installed once, by us or by a trained installer, on the cabinet computer. After that it maintains itself.

  • Where it runs: the smart-home server in the house (ARM64 Linux).
  • What it does: every protocol driver, the device database, scenes, flow automations, backups, the HomeKit and Google Home bridges.
  • How you reach it: http://<server-ip> on the house network, or the remote address once cloud access is active.
  • How it updates: System Update inside Installer Studio — see below.
Updating the server restarts it. Lights and blinds already wired to KNX keep working during the restart — the bus is independent — but the panels, the app and any automation will pause for under a minute.

3.Room panel (knx-panel)

The wall display. It fetches its own updates and needs no computer on site.

  • Where it runs: the in-wall touch panel, full screen, straight on the hardware.
  • What it shows: favourites, rooms, devices, scenes, the floor plan, the intercom.
  • How it updates: it asks the update server at start-up and then every 30 minutes. When a newer version exists, the panel shows the update notification and installs on confirmation.
A panel-only update restarts just the panel service — a few seconds of black screen, the server and every automation keep running untouched.

4.Panel app (Electron GUI)

The previous generation of the wall software. Kept updated for panels already in the field.

  • Same job as the room panel, built on Electron instead.
  • It is tracked as its own product, so a panel running it never receives the new panel software by accident, and vice versa.
  • New installations ship with the room panel.

5.Installer Studio

The commissioning tool: floors, rooms, devices, protocol connections, scenes, flows, floor plan, users.

  1. Run Installer Studio on your own computer — it ships as an application for Windows, macOS and Linux rather than living on the server.
  2. Point it at the house: the server's address on site, or the remote address once cloud access is active.
  3. Sign in with the installer account for that server.
  4. Everything is in the left menu, grouped by what you are doing.
Studio is not updated by the server's own update, and it is not covered by the backup — it is the one piece you keep current on your laptop yourself. After a server update, make sure your Studio is recent too, or newly added options will not appear in it.
Saved flow blocks are stored on the server rather than in Studio, so they follow the house and not the machine you happened to commission from.

6.Stratosfere cloud portal

Your account across all the houses you look after.

  • Nothing to install — it is this website. Sign in or create an account.
  • Shows every server you registered, online or offline, with its version and its backups.
  • Lets you back up and restore a house, and open any server with Manage.

7.How updating works

One flow, whichever piece is out of date.

  1. In Installer Studio open System Update from the left menu.
  2. The Software versions card lists Server (smart-api), Panel app (Electron GUI) and Room panel (knx-panel), each with its installed version and a badge: Up to date or Update available.
  3. Click Check for updates to re-ask immediately instead of waiting for the automatic check.
  4. Start the update. The page follows along and tells you plainly whether it installed, failed and rolled back, or finished in an unknown state.
  5. The server comes back on its own. From the portal you can watch it go offline and return.
Take a backup from the portal before every update. It takes seconds and it is the difference between a bad update being an inconvenience and being an evening of re-commissioning.
From the portal you can also press Check updates on a server card to see whether anything newer exists, without opening the house.

8.Sites without internet

A house with no internet connection still works completely — it just cannot fetch updates by itself.

  • Everything local keeps running: panels, scenes, automations, all bus traffic. None of it needs our cloud.
  • The update card will report that the update server is unreachable. That is expected, not a fault.
  • To update such a house, give it temporary internet access, or ask us for an offline update package.
Not sure which panel software a site is running? Ask the help desk with the server name — the System Update page tells us in one screenshot.