Function blocks
Everything you can drop on the Flows canvas, grouped the way the add menu groups it. Blocks with a full reference have their own page; the rest are described here.
1.Using blocks
The same three steps whatever the block.
Add it from the menu at the top of the Flows canvas, wire it by dragging from an output dot to an input dot, and press Deploy. Until you deploy, nothing you have drawn is running.
2.Triggers & actions
How a flow sees the house and how it acts on it.
Watches one property of one device. Fires on changed (a pulse on every change — use this for buttons), or when the value equals, is above or is below something.
Writes to one property of one device. Either a fixed value, or the value arriving on its input.
A source that fires with the error text whenever any flow on the server fails. Wire it to a Notification and the system reports its own faults.
3.Logic
4.Timing
Passes its input on after a set time.
Waits, then emits a pulse of a set length.
Separate delays for switching on and for switching off. The staircase-timer block: a new pulse on Tr restarts the off delay, so the light extends rather than toggling.
Runs for a set duration and reports when it finishes.
True before or after a clock time, or a sun event — sunrise, sunset, dawn, dusk or noon — with an offset in minutes. Needs the site location to be set.
Fires on a calendar schedule rather than on an event.
5.Memory
Holds a state between a set and a reset. SR is reset-dominant, RS is set-dominant — that is what decides the winner when both arrive at once. Both have Rem.
A named value shared by every flow on the server. Set it in one flow — holiday, guests — and read it in others.
6.Room blocks
The large blocks that hold a room's behaviour, so you do not build it out of gates.
A room's lighting: up to four circuits of any kind, saved moods, and automatic switching from presence or motion with separate timeouts.
Commands several Lighting Controllers at once — the hall button that switches a whole floor off.
Keeps a room at a setpoint: measured temperature in, on/off, fan speed and heat/cool out, with a deadband and a window-contact input that holds the unit off.
Arming away or stay, motion and contact inputs, entry and exit delays, siren and notify outputs. Stay mode bypasses the interior sensors.
7.Notify & subflows
Pushes a message to the panels and the app, with a severity and a cooldown so a chattering sensor cannot spam the customer.
The edges of a subflow, so a piece of logic can be built once and reused.
Your own combinations, saved and dropped into another flow or another project.