From the first drawing
to the tenth year.
We do the whole smart side of a building — specify it, install it, commission it, hand it over and keep it running. New build or retrofit, one apartment or a whole block.
Six things we do on every project
You can buy them separately, but they are designed to run in this order — each one leaves the next with something it can build on.
Design & specification
We take the drawings and the brief and come back with a system: bus topology, cabinet layout, panel positions, device schedule and a clear scope of what each subsystem will do.
- Device & load schedule
- Cabinet and bus layout
- Budget-tiered options
Installation & commissioning
The smart server goes into the cabinet, the buses are terminated and every device is discovered, named, placed in a room and tested against the schedule.
- Server & gateway install
- Bus testing and addressing
- Point-by-point sign-off
KNX engineering
Full KNX work: actuators, dimmers, sensors and touch inputs, group-address structure, datapoint types, and the IP interface the server talks to.
- Group-address plan
- Actuator & sensor setup
- IP tunnelling / routing
Retrofit & integration
Buildings that already have something installed. We join what is there — Zigbee, Z-Wave, Modbus, Shelly, Wi-Fi devices — instead of ripping it out.
- Wireless retrofit, no rewiring
- Legacy gateway integration
- Phased migration
Automation programming
Scenes, schedules, presence logic, solar times and conditional flows drawn on the canvas, deployed to the server and verified on site — not left as a demo.
- Scenes & schedules
- Presence and daylight logic
- Alarm and safety interlocks
Panels, app & handover
Rooms, favourites and floor plan laid out for the people who will actually use it, then a walkthrough with the client so nobody is left guessing.
- Panel & app layout
- Floor plan with live devices
- Handover session and manual
All of it on one server
Because every subsystem ends up in the same device model, they can be combined: a single scene can dim the lights, drop the blinds, set the heating back and arm the alarm.
Lighting
Switching, dimming, tunable white, RGB / RGBW, circadian scenes and central all-on / all-off.
Heating & cooling
Thermostats, underfloor loops, fan-coil units, heat pumps and per-room setpoints and modes.
Shading
Blinds, roller shutters, awnings and slat angle, driven by time, sun position or weather.
Security & access
Alarm zones, arming modes with entry and exit delays, panic, door contacts and passcode-locked controls.
Energy & metering
Modbus meters, inverters and sub-metering read into the same model, ready for logic and dashboards.
Voice & ecosystems
Apple HomeKit and Google Home so the same devices answer to Siri or the Google Assistant.
Three ways to bring us in
Every project is quoted on its own scope — there is no package price for a building we have not seen. These are the shapes the work usually takes.
Turnkey project
Most commonWe own the smart side end to end — design, supply, install, commission, hand over and support. One contract, one number to call.
- Specification and device schedule
- Cabinet build and commissioning
- Automation, panels and client training
- First year of monitoring included
Integration partner
For installersYou do the electrical work, we do the smart layer. You keep the client relationship; we commission the server and hand you a documented system.
- Remote or on-site commissioning
- Bus and device schedule review
- Your own installer account in the portal
- Escalation path for site problems
Support & takeover
Existing systemsFor buildings whose original integrator is gone, or whose system nobody can change any more. We survey it, document it and take it over.
- Survey of the existing installation
- Migration onto the smart server
- Full configuration backup and documentation
- Ongoing monitoring and remote fixes
Maintenance is part of the job
A smart building that nobody maintains becomes a dumb building with extra steps. Every system we install stays visible to us, so support is something we can actually deliver.
We see it before you call
Every server we install reports into Stratosfere Cloud. Offline sites, failed buses and pending updates show up on our side, not only on yours.
Most fixes need no visit
With remote access enabled we open the site's dashboard, look at the real state of the devices and change what needs changing from here.
Nothing is ever lost
The whole configuration — floors, rooms, devices, scenes, flows, connections — is snapshotted and restorable, so a mistake or a failed board is an hour, not a re-commissioning.
Tell us what the building needs
Send the drawings and the subsystems you want covered. You get back a scope, a device list and a price — not a brochure.