Every system in the building.
One smart server.
Stratosfere is the smart home solution we build at Advantx. It brings lighting, climate, shading, security and energy onto a single local server — whatever bus they speak — and gives everyone the right tool: panels for the residents, a studio for the installer, a cloud for the fleet.
We make a building behave like one system
Most projects end up as islands: a lighting bus here, an HVAC controller there, three apps and no one who can change anything afterwards. We replace that with one server that owns the whole building, and the tools to keep it alive for years.
One server, every protocol
KNX, Zigbee, Z-Wave, Modbus, MQTT, Shelly, eBelong and plain Wi-Fi devices are normalised into a single device model. A light is a light — no matter which bus it hangs on — so scenes and automations mix technologies freely.
Local first, always awake
Logic, scenes, schedules and alarm handling execute on the server in the building. The internet is for updates and remote support, not for switching a light. When the line drops, the house does not.
Built for the installer
Floors, rooms, devices and properties are commissioned from a visual studio: drag a floor plan, discover a bus, wire an automation on a canvas. Handover is a finished system, not a pile of scripts.
Supported after handover
Every server you deploy reports into Stratosfere Cloud. See what is online, what needs an update, take a snapshot of the whole configuration and open the full dashboard remotely — without driving to site.
Three surfaces, one system underneath
The same devices, rooms and scenes are seen through three different windows — each one built for the person standing in front of it.
Panels & app
A touch interface tuned for wall panels, tablets and phones: rooms, favourites, scenes, floor plan and a screensaver with gesture shortcuts.
- Room and favourite tiles, long-press to pin
- Live floor plan with light glow and climate tint
- Scenes, schedules and alarm arming with countdown
- Passcode-protected devices and voice-assistant links
Installer Studio
The commissioning dashboard. Structure the building, discover devices on every bus, and build automation on a node canvas — no code, no text files.
- Building tree: floors, rooms, devices, properties
- KNX group addresses, Zigbee, Z-Wave and Modbus tooling
- Flow canvas: triggers, conditions, schedules, scenes
- Editable floor plans with per-device markers
Stratosfere Cloud
The fleet layer. Every site you have installed in one list, with live status, version tracking, backups and remote management.
- Online / offline monitoring with outage history
- Software version checks and guided OTA updates
- One-click configuration snapshots and restore
- Open any site's dashboard remotely from the portal
What the system actually controls
Every subsystem below lives in the same device model, so any of them can appear in a scene, a schedule or an automation together.
Lighting
Switching, dimming, tunable white and full RGB / RGBW with a colour wheel on panel and canvas alike.
Climate
Thermostats, underfloor heating and fan-coil units: setpoints, modes and fan speeds from one control.
Shading
Blinds, shutters and awnings with position, slat angle, group control and sun-time schedules.
Security
Alarm zones with armed modes, entry and exit delays, instant panic, and passcode-locked devices.
Automation
A flow canvas of triggers, conditions, timers, solar times and scenes — deployed to the server, run locally.
Energy
Modbus meters and inverters read into the same device model, ready for dashboards and logic.
Floor plans
A drawn plan of the building where every device sits in its real place and reacts in real time.
Notifications
Flow-driven messages land in the panel's notification bell, with the triggering value inline.
It joins what is already there
A retrofit rarely starts from zero. The server talks to the buses and brands already in the building, and puts everything behind one consistent model — so a KNX dimmer, a Zigbee bulb and a Wi-Fi strip can share the same scene.
From cabinet to handover
A predictable path for every project — and a system that stays serviceable long after the keys change hands.
Specify
We size the system with you: buses, panels, cabinet layout and which subsystems belong on the server.
Install
The smart server goes into the cabinet and joins the building network. Zigbee is on board; other buses come in over their gateways.
Commission
Floors, rooms and devices are created in the Installer Studio, automations are drawn on the canvas and deployed.
Hand over & support
The client gets panels and app. You get the site in Stratosfere Cloud, with monitoring, backups and remote access.
We build the platform we install
Server, panel software, installer studio and cloud are all ours. When a project needs a device type, a protocol quirk or a control that does not exist yet, it gets built into the product instead of hacked around on site.
Engineering-led
Firmware, backend, panel and cloud under one roof — one team answers for the whole chain.
Private by design
The building's state stays in the building. Cloud access is opt-in, scoped and revocable.
Serviceable for years
Monitoring, versioned updates and full configuration snapshots mean a site is never a black box.
Planning a project?
Tell us the building and the subsystems, and we will come back with a layout, a device list and what the handover looks like. Already working with us? Your sites are one click away.
New to the platform? Start with the user manual.